Tool Set Kit

Makita 18V 8 Piece Cordless Tool Kit with 3 x 5.0Ah Batteries Charger T4TKIT-133

Makita 18V 8 Piece Cordless Tool Kit with 3 x 5.0Ah Batteries Charger T4TKIT-133

Makita 18V 8 Piece Cordless Tool Kit with 3 x 5.0Ah Batteries Charger T4TKIT-133    Makita 18V 8 Piece Cordless Tool Kit with 3 x 5.0Ah Batteries Charger T4TKIT-133

Makita 18V 8 Piece Cordless Kit with 3 x 5.0Ah Batteries T4TKIT-133. 3 x 5.0Ah BL1850 Batteries.

1 x DHP486 Brushless Combi Drill. 1 x DHP486 Brushless Combi Drill 1 x DTD154 Brushless Impact Driver 1 x DHS680 Brushless Circular Saw 1 x DJV182 Brushless Jigsaw 1 x DKP180 Planer 1 x DGA463 Brushless Angle Grinder 1 x DHR242 Brushless SDS+ Hammer Drill 1 x DML185 Torch 3 X 5.0Ah BL1850 Batteries 1 x DC18RC Charger 2 x Tool Bag.

Makita DHP486 Brushless Combi Drill. Forward / reverse rotation Single sleeve keyless chuck allows for easy bit installation/removal by one hand. Electric brake 2 mechanical gears. Variable speed control by trigger Best possible ergonomic handle for drill-driver applications. Brushless motor LED job light All metal gear construction Metal gear housing Belt clip. Makita DTD154 Brushless Impact Driver. The DTD154 brushless impact driver features high operation efficiency with a 175Nm max torque, 4 pole motor, keyless single sleeve ¼ hex chuck, accepting M5 - M14 standard bolts, M4 - M8 machine screws making it ideal for repetitive screwdriving. The impact driver has a no load speed of 3600rpm providing up to 3800ipm, the percussive action saving time and effort, driving screws up to 30% faster than a conventional drill/driver, no pilot hole is needed even into hardwood. It features a maintenance free brushless motor for increased life, electronic brake, a conveniently located push button for forward and reverse and an LED job light with preglow for use in low visibility applications. The compact & lightweight 1.5kg design of the DTD154 makes transportation around the worksite easy without compromising on power, whilst the redesigned belt clip and ergonomic soft grip handle provides maximum user comfort reducing fatigue on prolonged use, providing greater tool control. The Makita DTD154Z is supplied as a tool only unit and has no batteries, charger or case making it the ideal way to build up an existing Makita 18V kit. Batteries and charger are available separately.

Makita DHS680 Brushless Circular Saw. Automatic Speed Control: Automatically changes the cutting speed according to load condition for optimum operation. High Efficiency Brushless motor provides higher power and more work amount.

Electronic current limiter for overload protection. Blower function to clear wood dust from cutting line.

Larger base than current models for more stable operation. Brushless motor - less friction Bevel cutting - Aluminium base can be tilted up to 45 Degrees left or right New improved dust extraction hose joint Rigid aluminium base bevels 0 to 45 degrees left and right Change lever for 3 orbital settings and straight cutting Tool-less blade change Variable speed control dial Soft start feature - smooth graduated start up "Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body Blower function to clear wood dust from cutting line Trigger switch with lock-on button Ergonomic soft grip - non slip Twin LED job light. Planes a width of 82mm (3¼) in a single pass. Fitted with a comfortable operator handle.

Easy to use adjustable depth settings. A precision machined aluminum base allows for planing accuracy and the cutter head makes 14000 cuts per minute for fast stock removal. The lock -on button gives the operator the option of continuous operation. Left and right handed use due to the buttons on either side of the handle. Dust extraction port on the side.

Adjustable up to a 2mm depth of cut. Shoe on the underside stops accidental laying down of planer while blade is still moving. Rebates to a maximum depth of 9mm. 22 minute charge time with the air cooled Makstar Optimum Charging System. Lithium -ion batteries have greater life spans than their Ni -MH or Ni -Cad counterparts giving 430% greater run time. Lithium -ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni -MH battery.

Makita DGA463 Brushless Angle Grinder. Brushless motor Variable speed control dial Anti-Restart function Electric brake Slide switch Electronic current limiter Battery fuel gauge Ergonomic soft grip Automatic torque drive technology (ADT): adjusts speed and torque during operation for optimum performance Active Feedback sensing Technology (AFT) : turns the motor off if rotation of the wheel is suddenly forced to stop Wire mesh intake covers are engineered to prevent debris from entering motor Lock on function Tool-less wheel cover. Makita DHR242 Brushless SDS+ Hammer Drill. One touch slide chuck for SDS-plus bit.

3 mode operation Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30% Unique rubber joint construction. Rubberised soft grip of ergonomic design 4 position pivoting head Falling impact strength of 1m 18v torch for use with lithium-ion batteries. 3 x 5.0Ah BL1850 Batteries 1 x DC18RC Charger 1 x 14" Tool Bag 1 x 26" Tool Bag. Part No: T4TKIT-133 Barcode: 8906763310788. Part Number: DHP486Z Barcode: 0088381739566 Voltage: 18 v Battery Type: Lithium-ion Chuck Capacity: 1.5 - 13 mm No Load Speed (Hi): 0 - 2,100 rpm No Load Speed (Lo): 0 - 550 rpm Blows per Minute (Hi) - ipm: 0 - 31,500 ipm Blows per Minute (Lo) - ipm: 0 - 8,250 ipm Max.

In wood: 76 mm Max. In masonry: 16 mm Max.

In steel: 13 mm Torque Settings: 21 + Drill Vibration K factor: 1.5 m/sec² Noise sound pressure: 84 dB(A) Noise sound power: 95 dB(A) Noise K factor: 3 dB(A) Max. Fastening Torque (Soft Joint): 65 Nm Max. Fastening Torque (Hard Joint): 130 Nm Vibration: Impact drilling into concrete: 8.0 m/sec² Vibration: Drilling into metal: 2.5 m/sec².

Barcode: 0088381824125 175Nm Max Torque M5 - M14 Standard Bolt M4 - M8 Machine Screw No Load Speed 0-3800rpm. Barcode: 0088381651882 Battery Type: Li-ion Charging Time: 36 min Voltage: 18v Max. In steel: 10 mm Max. In wood: 135 mm Max in aluminium: 20 mm Strokes per Minute: 800 - 3,500 spm Shank: Universal Stroke Length: 26 mm Noise sound pressure: 78 dB(A) Noise K factor: 3 dB(A) Maximum Output: 390W.

Barcode : 00088381662635 Planing Width: 82mm - 3¼ Planing Depth: 2mm Max rebate depth: 9mm Battery type: Li -ion Charging Time: 22 min No load speed: 14000rpm. Barcode : 0088381853514 Battery Type - Lithium-ion Voltage - 18 v Bore Diameter - 22.23 mm Max Wheel Thickness - 7.2 mm Noise sound pressure - 79 dB(A) Noise K factor - 3 dB(A) Max Wheel Diameter - 115 mm No Load Speed - 3,000 - 8,500 rpm Vibration K factor - 1.5 m/sec² Vibration: Surface Grinding - 6.5 m/sec² Vibration: Disc Sanding - 2.5 m/sec². Barcode: 0088381654326 Battery Type - Lithium-ion Charging Time - 22 min Voltage - 18 v Capacity in Concrete - 24 mm Capacity in Steel - 13 mm Capacity in Wood - 27 mm Impact energy - 2.0 J Blows per minute - 0 - 4700 bpm No Load Speed (Hi) - 0 - 950 rpm Vibration: Drilling - 3.5 m/sec² Vibration K factor - 1.5 m/sec² Vibration: Hammer Drilling - 13.5 m/sec² Vibration: Chiselling - 10.5 m/sec².

Barcode: 0088381675628 Part Number: DML185 Voltage: 18V. Images for illustrative purposes only - please refer to description and specification for full details of product. Additional charges will be imposed if, weight is more than 1kg. Postcodes Details are Given Below.

HS 1-9, I 1-56, KA27-28, KW1-17, PA20-49, PA62-77, PA60-61, PA78, PH17-26, PH-30-44, PH49-50, ZE1-3, BT1-94, IM1-9, IM99, TR21-25, Isle Of Wight. If, you receive any Parcel from us that contains damaged goods, this should be notified to customer services who will arrange for collection and replacement, within the 24-48 hours period. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Power Tool Sets". The seller is "tools4trade" and is located in this country: GB. This item can be shipped to United Kingdom.

  1. Model: T4TKIT-133
  2. Battery Included: Yes
  3. Power Source: Battery
  4. Type: Power Tool set
  5. Number of Tools: 8
  6. MPN: T4TKIT-133, DHP486, DTD154, DHS680, DJV182, DKP180, DGA463, DHR242, BL1850, DC18RC, DML815
  7. EAN: 8906763310788
  8. Number of Batteries: 3
  9. Battery Technology: Lithium-Ion (Li-Ion)
  10. Brand: Makita
  11. Voltage: 18 V

Makita 18V 8 Piece Cordless Tool Kit with 3 x 5.0Ah Batteries Charger T4TKIT-133    Makita 18V 8 Piece Cordless Tool Kit with 3 x 5.0Ah Batteries Charger T4TKIT-133